Light Switch Installation & Repair in Dallas-Fort Worth
From basic toggle switches to modern dimmers and smart switches, Spillers Electric handles all light switch installations and repairs across the DFW metroplex. A properly installed switch improves convenience, saves energy, and enhances the look of your home.
Get a Free QuoteLight Switch Not Working or Stopped Suddenly?
A light switch that won't turn on — or only works sometimes — usually points to a failed switch mechanism, a loose wire connection, or a deeper circuit issue. Don't ignore it. Even a "minor" switch problem can indicate a fire hazard behind the wall.
Common Causes & What We Do
Light switch not turning on
Test & replace failed switch mechanism
Switch works sometimes / intermittent
Locate & repair loose wire connection
Switch only works if held down
Replace worn-out spring contact switch
Switch stopped working suddenly
Check breaker, wiring & switch integrity
Light won't turn off at all
Diagnose stuck relay or miswired switch
Licensed & Insured
Same-Day Available
Dangerous Light Switch Warning Signs
These symptoms mean your switch is failing or your wiring is damaged. Every one of these is a potential fire or shock hazard — don't wait.
Light Switch Sparks
Visible sparks when flipping a switch indicate arcing inside the switch or loose wire connections. Arcing generates extreme heat and can ignite surrounding materials.
Stop using the switch immediately. Call us for emergency replacement.
Burning Smell from Switch
A burning or melting plastic smell near a switch means wiring insulation is overheating. This is an active fire risk happening inside your wall.
Turn off the breaker for that circuit and call us immediately.
Switch Hot to Touch
A warm or hot switch plate means the switch is handling more current than it's rated for, or connections are loose and arcing. Dimmer switches may feel slightly warm — regular switches should not.
Replace with a properly rated switch. We'll check the circuit load.
Buzzing Light Switch
A humming or buzzing switch often indicates a loose connection, an incompatible dimmer, or a switch nearing failure. With dimmers, it can also mean the dimmer isn't compatible with your LED bulbs.
We'll diagnose the cause and install a compatible replacement.
Flickering Light When Switch On
Lights that flicker only when a specific switch is used point to a failing switch, loose wiring at the switch box, or an overloaded circuit sharing too many loads.
We'll test the switch, tighten connections, and check circuit load.
Switch Shocked Me
Getting a shock or tingle when touching a switch means current is leaking to the faceplate — usually from a ground fault, missing ground wire, or damaged insulation inside the box.
Do not touch the switch again. Call us for emergency diagnosis.
LED Compatible
Modern Dimmer Tech
Dimmer Switch Not Working or Flickering LEDs?
Dimmer switches are one of the most common sources of flickering, buzzing, and overheating — especially when paired with incompatible LED bulbs. A mismatched dimmer can damage your bulbs, waste energy, and even pose a fire risk.
Common Dimmer Problems
Dimmer switch not working at all
Test wiring & replace failed dimmer module
Dimmer flickering with LED lights
Install LED-compatible (CL) dimmer switch
Dimmer switch buzzing or humming
Replace with quality LED dimmer rated for your load
Dimmer Switch Upgrade & Installation
Whether you're replacing a broken dimmer, upgrading from a standard switch, or installing dimmers throughout your home — we handle it all with clean, code-compliant work.
Replace Dimmer Switch
$120 – $250
Swap out a broken, buzzing, or incompatible dimmer with a modern LED-compatible model. Includes testing and calibration.
Schedule ServiceUpgrade to Dimmer Switch
$150 – $300
Convert any standard toggle switch to a sleek dimmer. We match the right dimmer type to your bulbs and circuit for flicker-free performance.
Schedule ServiceWhole-Home Dimmer Install
$500 – $1,200+
Install dimmer switches in every room for full lighting control. Includes LED-compatible dimmers, smart dimmer options, and multi-location wiring.
Schedule ServiceReplace, Upgrade & Modernize Your Light Switches
Old toggle switches, yellowed plates, and outdated wiring don't just look bad — they can be unreliable and unsafe. We install modern rocker switches, smart switches, and motion sensors throughout DFW homes.
Replace Old Light Switches
$100 – $200
Swap worn-out, cracked, or paint-caked switches with fresh, modern replacements. Includes testing all connections.
Get a QuoteToggle to Rocker Switch
$100 – $180
Upgrade old-fashioned toggle switches to sleek, modern rocker-style switches. Same wiring, better look and feel.
Get a QuoteSmart / WiFi Switch Install
$150 – $350
Install WiFi-enabled smart switches compatible with Alexa, Google Home, and Apple HomeKit. We ensure neutral wire availability and proper setup.
Get a QuoteMotion Sensor Switch
$150 – $250
Hands-free lighting for closets, garages, bathrooms, and hallways. Auto-on when you enter, auto-off when you leave — saves energy effortlessly.
Get a QuoteWhat We Offer
Single-pole switch installation & replacement
3-way and 4-way switch wiring
Dimmer switch installation
Smart switch and smart dimmer installation
Timer switch installation
Fan/light combo switch installation
Switch plate and cover upgrades
Faulty or flickering switch repair
Frequently Asked Questions
How much does it cost to install a light switch in DFW?
A standard light switch replacement costs $100–$200 in the Dallas-Fort Worth area. New switch installations requiring new wiring cost $200–$400. Dimmer and smart switches cost slightly more due to the hardware.
How much does a dimmer switch cost to install?
Dimmer switch installation costs $150–$300 per switch in the DFW area, including the dimmer and labor. We recommend LED-compatible dimmers to prevent flickering and ensure smooth dimming.
How much does a 3-way switch installation cost?
3-way switch installation (controlling a light from two locations) costs $200–$450 in DFW, depending on whether new wiring needs to be run between the switch locations.
Can I replace a regular switch with a smart switch?
Yes, in most cases. Smart switches typically require a neutral wire, which homes built before the 1980s may lack. We can run a neutral wire for $100–$200 per switch location if needed.
Why is my light switch buzzing or warm?
A buzzing or warm switch can indicate a loose connection, overloaded circuit, or failing switch. This is a potential fire hazard and should be inspected by a licensed electrician right away.
How much does a fan/light combo switch cost?
Installing a combination fan and light switch costs $150–$300 in the DFW area. These switches let you independently control the fan speed and light brightness from a single wall plate.
Can you add a switch where there isn't one?
Absolutely. We can add new switch locations to control existing lights or fixtures. The cost is typically $200–$400 depending on wiring access and distance.
How much does it cost to install a motion sensor switch?
Motion sensor switch installation costs $150–$250 per switch in DFW. These are great for closets, garages, bathrooms, and laundry rooms where hands-free lighting is convenient.
Related Electrical Services
Light Switch Installation & Repair Near You
We provide light switch installation & repair across the DFW metroplex. Select your city for local details.
Ready to Get Started?
Call us today for a free, no-obligation quote on your light switch installation & repair project.
(817) 447-7141